The short answer
Check Your Faucets and Showerheads First
Start your investigation at the point of use. A single faucet or showerhead with low flow likely has a clogged aerator or mineral buildup. These small screens can be unscrewed and cleaned in vinegar to restore pressure. If cleaning doesn't help, the fixture's internal cartridge may be failing and need replacement.
Whole-house low pressure rules out a single fixture. If every cold and hot water tap is weak, the issue is in your plumbing system or the incoming supply. Note if the problem started suddenly or has gotten worse over time. This detail helps narrow down whether it's a sudden valve closure or a gradual pipe obstruction.
Inspect Main Valves and the Pressure Regulator
Your home's main water shutoff valve should be fully open. Locate this valve, often near where the main pipe enters your house or at the water meter. Turn it counterclockwise as far as it will go. A valve that is only partly open is a frequent and easily fixable cause of low pressure.
Many homes have a pressure reducing valve (PRV) on the main line. This device controls the pressure from the street to a safe level for your pipes. A failing PRV can cause pressure to drop severely. You can have a plumber test it. If you don't have a PRV, the issue lies elsewhere.
- The main house shutoff valve may have been partially closed after recent work.
- Your water meter may have a separate shutoff valve that needs checking.
- A faulty pressure regulator often fails gradually, causing a steady pressure decline.
- Corrosion inside old galvanized steel pipes can severely restrict water flow over decades.
- In Boca Raton, keep your shutoff valve location written down for quick access.
- A plumber can install a pressure gauge to diagnose regulator or supply issues.
When Pipe Condition Is the Culprit
Older homes with galvanized steel pipes are prone to internal corrosion and mineral scale. This buildup narrows the pipe's interior diameter, restricting flow like a clogged artery. The problem worsens over many years. You may notice low pressure that improves briefly after a faucet is first turned on, followed by a drop.
Re-piping with modern materials like copper or PEX is the permanent solution for corroded pipes. This is a major plumbing project. A more immediate, though temporary, fix could involve installing a water pressure booster pump. A qualified plumber can assess your pipe condition and discuss the best long-term option for your home's specific situation.
Municipal Supply Issues and Next Steps
Sometimes the problem originates with your local water utility. A main break, maintenance work, or high demand can temporarily lower pressure for your entire neighborhood. Contact your water provider to ask if there are known issues. They can also test the pressure at the connection to your property.
If your investigation points to a leak inside your walls or under your slab, it's time to act. Persistent moisture from a leak creates an environment for mold growth and can weaken structural materials. In such cases, contacting local water damage pros for assessment and drying is a prudent step after the plumber fixes the leak. Policies vary, and your insurer decides what is covered.
Need help right now?
Water keeps spreading into floors and walls, so it is worth acting early. Calls are answered 24/7.
Call Now (561) 794-2954Frequently asked questions
Could a water heater cause low pressure?
Yes, but usually only for hot water. Sediment buildup in the tank's bottom or a faulty valve on the heater's inlet can restrict hot water flow. If your cold water pressure is normal but hot is low, the water heater is a likely suspect and should be inspected by a plumber.
What should I do if only my shower has low pressure?
First, remove and clean the showerhead to clear mineral deposits. If that doesn't work, check for a flow-restricting valve on the shower arm pipe. Some shower valves also have an integrated pressure-balancing spool that can fail. Replacing the shower cartridge or the entire valve may be necessary.
Can tree roots affect my water pressure?
Yes. Roots from large trees can infiltrate and crush underground water service lines, causing major leaks or blockages. This leads to a severe drop in pressure. Signs include soggy patches in your yard far from irrigation. A plumber can use a camera to inspect the underground line for root intrusion.