The short answer
Check Your Water Meter First
Before you look for a leak, confirm there is one by reading your water meter. Turn off all water-using fixtures and appliances, both inside and outside. Go to your water meter and note the reading, then do not use any water for one to two hours. If the meter reading has changed, you have a continuous leak somewhere on your property, and it is time to investigate further.
This simple test can confirm a leak even if you see no water. If the meter moves, the leak could be underground in a supply line, under your slab foundation, or within a wall. A digital meter may have a small flow indicator that spins with even minor water movement. This test is a critical first step before calling a plumber or other professional.
Inspect Toilets and Irrigation Systems
A running toilet is a leading cause of unexplained high water bills. A worn flapper valve can let water silently leak from the tank into the bowl. You can test for this by adding a few drops of food coloring to the tank. Wait without flushing for a while. If color appears in the bowl, the flapper likely needs replacement.
Outdoor irrigation is another major culprit. A broken sprinkler head, a leaking valve, or a damaged pipe in the zone can waste thousands of gallons. Check your system for geysers, soggy spots, or areas that are unusually green. Irrigation systems can be damaged by weather or overgrown roots.
- A continuously running toilet flapper valve.
- A cracked or misaligned sprinkler head spraying water.
- A leaking irrigation valve that fails to close fully.
- A broken pipe in an underground irrigation line.
- A faulty timer that runs zones too long or too often.
- Drip irrigation lines that have become detached or punctured.
Examine Appliances and Water Heaters
Household appliances can cause hidden water loss. A water softener that is stuck in regeneration mode can run excessive backwash cycles, using hundreds of extra gallons. Check the unit for any signs of cycling when no water is being used in the house. A malfunctioning ice maker line or a refrigerator's water filter housing can also develop slow, steady leaks.
A water heater with a faulty temperature and pressure relief valve or a corroded tank can leak. Check the area around the heater and the drain pipe for moisture or drips. The leak may be intermittent, only occurring when the heater heats up and the internal pressure increases. This water often drains to a floor drain, making it easy to miss.
When to Contact a Professional
If your meter test confirms a leak but you cannot find the source after checking toilets, irrigation, and appliances, you need a professional plumber. They have the tools to locate leaks behind walls or underground. A persistent leak can cause significant water damage and mold, which requires separate restoration work by qualified water damage professionals if the area becomes wet.
Addressing a hidden leak quickly prevents structural damage and mold. If you discover water damage from a leak, local water damage pros can dry the area properly. They use industrial equipment to remove moisture from materials. This helps prevent secondary damage. Policies vary, and your insurer decides what is covered, so check your policy and document the damage.
Talk to someone now
Water keeps spreading into floors and walls, so it is worth acting early. Calls are answered 24/7.
Call Now (561) 794-2954Frequently asked questions
Could a high bill be a meter error?
It is possible but rare. You can request a meter accuracy test from your water utility. More commonly, the issue is a seasonal change in use, a rate increase you did not notice, or a leak you have not found. Always rule out a leak first with the meter test.
What should I do if I find water damage?
Stop the water source if you can safely do so. Then, contact the professionals to assess and dry the affected area. They can prevent mold growth and structural issues. Take photos for insurance documentation. Policies vary, and your insurer decides what is covered.
How much does leak detection cost?
Costs often range from $150 to $400 or more, depending on the leak's location and detection method. It depends on your home's size, construction, and the time required. A simple visual inspection costs less than electronic or thermal imaging leak detection for hidden pipes.